News
CONTACT US
National Marketing Hotline:
International Sales Hotline:
After-sales Hotline:
Contact Email:
Contact Address:
NO.977 Qingwei Road, Jimo District, Qingdao City
Attention for operating concrete pump truck
Release time:
2024-10-23
Data source:
The concrete pump truck should be parked in a flat and solid place. The bottom of the outrigger should be stabilized by skid support, and there should be no obstacles within the rotation range of the boom.
For daily operating concrete pump trucks, what attention we should pay so that can ensure using the concrete pump truck safely and lengthen the service life of the concrete boom pump? Let’s see the tips as follows:
1.The concrete pump truck should be parked in a flat and solid place. The bottom of the outrigger should be stabilized by skid support, and there should be no obstacles within the rotation range of the boom. It is strictly forbidden to work under high-voltage transmission lines.
2. Check before the operation to confirm safety.
(1) The stirring mechanism works normally, and the transmission mechanism should act accurately;
(2) The cracks, damage, deformation, and wear of the conveying pipe should be within the specified range;
(3) The pipe connection should be well-sealed;
(4) The hopper screen is in good condition;
(5) The hydraulic system should work normally;
(6) Instruments and signal indicators are complete and intact, various and dynamic valves are flexible and reliable in positioning.
3. It is strictly forbidden to connect long conveying pipes and hoses during operation. The hose must not be dragged on the ground.
4. The boom should be opened in strict order during the operation. It is strictly forbidden to operate when the wind is greater than level 6 (including level 6).
5. It is strictly forbidden to use the boom as a lifting tool.
6. During the pumping operation, the operator should pay attention to observing the construction work area and the working status of the equipment. No one should stay within the working range of the boom.
7. It is strictly forbidden to pull the hydraulic outrigger control valve during operation. If it is found that the car body is inclined or other abnormal phenomena, the operation should be stopped immediately, the boom should be retracted for inspection, and the operation should be continued after the fault is eliminated.
8. During pumping operation, it is strictly forbidden to cross the mixing hopper.
9. When removing the blockage of the pipeline, the surrounding personnel should be evacuated. Before dismantling management and cleaning, a back-pumping method should be adopted to eliminate the pressure in the conveying pipeline. When dismantling, it is strictly forbidden to face people.
10. Do not remove the hopper grille and other installation devices during operation. Do not climb and ride on the delivery pipeline, and do not stretch the handle into the valve body. It is strictly forbidden to disassemble the pipeline when pumping.
11. When cleaning the pipeline, the operator should leave the outlet of the pipeline and the elbow joint. If the pipeline is cleaned with compressed air, there shall be no personnel and equipment within 10m of the pipeline outlet.
Other News
If we consider what the construction machinery industry has witnessed in the past two decades, it is undoubtedly the increasingly prominent presence of national brands.
Precautions for concrete pump operation
Users should operate and maintain the pump in accordance with the requirements of this instruction manual. If the pump fails due to improper operation or maintenance by the user.
The Solutions to the Failure of the Remote - Controlled Boom of a Pump Truck
In the process of mechanization replacing manual labor, the application of concrete pump trucks in concrete construction has become commonplace.
In 2025, these railroads will begin construction and are worth waiting for!
Provinces and municipalities are striving to start projects. The preliminary work of the feasibility study has reached a certain depth, but the progress this year is not obvious.
Attention for operating concrete pump truck
The concrete pump truck should be parked in a flat and solid place. The bottom of the outrigger should be stabilized by skid support, and there should be no obstacles within the rotation range of the boom.
Classification of Aerial Work Vehicles
Vertical lift (also known as scissor-type) aerial work trucks, folding boom lift aerial work trucks, self-propelled aerial work platforms, telescopic boom aerial work trucks.
China's aerial work truck industry industry characteristics
As the demand for products involves street lighting, gardening, electric power, petrochemical, communications and other industries, the use of the product varies, the specifications of the product
China Aerial Work Vehicle Industry Market Demand and Investment Planning Analysis Report
According to the lifting mechanism type division, the current aerial work trucks are mainly straight extension, curved boom (folding boom), hybrid, shear fork; according to the use of functional divisions